- Cable wire Coiling Binding
- Tape winding machine
- Semi-auto strip twist brush
- Wire cutting stripping machine
- Semi-auto crimping machine
- Stripper crimper Blades
- Terminal Tensile Tester
- Cut-off machine
- Cable labeling machine
- Strapping banding tool
- Terminals/connector/Plugs
- Automated Tape Dispenser
- Automatic Crimp Machine
- Terminal Crimping tools
- Auto Wire feeder
- Automatic soldering machine
- Nylon Cable Tie Machine
- Injection molding machine
- Brazing welding machine
- Screw fastening machine
- Power cord crimping machine
- Wire harness tester
- Glue Dispensing Robot
- Wiring harness Packing materials
Braided Sleeving Wrap-around Threading Machine for Wire and Cable
- Model No : WPM-BZ1
- This automatic braided sleeving wrap-around machine is suitable for threading woven sleevings onto wire harnesses and cables. hreading braided sleeving for wire and cable machine, machine to wrap-around/install braided sleeving for wires, install braided sleeving onto wire and cable machine, braided sleeving wrap-around machine for wire and cabl, wire insulation nylon braided sleeve wrapping machine
Model WPM-BZ1
Applicable sleeving fiber sleeving (woven mesh sleeving), melt cut materials
Applicable wire range custom type (the wire diameter does not exceed the pipe diameter)
Applicable guide tube range diameter 12-25mm
Cutting accuracy ±3MM
Cutting length 100mm-1200mm
Speed no less than 1000PCS/hour (depending on sleeving size and manual operation speed)
Power single phase AC 220V/50HZ
Energy consumption 400W/Hr
Operating ambient temperature -5 ° C ~ +40 ° relative
Relative humidity (40 ~ 90)% RH
Access gas source 0.4~0.6MPA
Weight about 80KG
Dimension - Inquiry now
This automatic braided sleeving wrap-around machine is suitable for threading woven sleeves onto wire harnesses and cables.
This automatic braided sleeving wrap-around machine fuses the woven sleeving according to the set length and sends it to the side of the hollow guiding tube for threading.
Fast speed, good threading effect, simple operation, and precise cutting
Suitable for wrapping-around different types of braided sleeving onto wire harnesses and cables
It consists of a fine-tunable photoelectric control system and a PLC control system. The cutting length can be set, and the cutting performance is stable.
Applicable products: automotive wiring harness, electronic wire, medical wire, metal, wire, cable, etc.
Applicable industries: wire harness processing plant, electronics factory, electrical appliances, hardware, etc.
|
Model |
WPM-BZ1 |
|
Applicable sleeving |
fiber sleeving (woven mesh sleeving), melt cut materials |
|
Applicable wire range |
custom type (the wire diameter does not exceed the pipe diameter) |
|
Applicable guide tube range diameter |
diameter 12-25mm |
|
Cutting accuracy |
±3MM |
|
Cutting length |
100mm-1200mm |
|
Speed |
no less than 1000PCS/hour (depending on sleeving size and manual operation speed) |
|
Power single |
single phase AC 220V/50HZ |
|
Energy consumption |
400W/Hr |
|
Operating ambient temperature |
-5 ° C ~ +40 ° relative |
|
Relative humidity |
(40 ~ 90)% RH |
|
Access gas source |
0.4~0.6MPA |
|
Weight |
about 80KG |
|
Dimension |
500W*1230L*1115H(mm) (subject to actual production) |
|
Note |
Special materials can be customized. |
- Categories
- Cable wire Coiling Binding
- Tape winding machine
- Semi-auto strip twist brush
- Wire cutting stripping machine
- Semi-auto crimping machine
- Contact Us
sales@cablecutting.net
kevin201166
+86-18965153335